Select Page

Element Tungsten Speaker Cable with UEF Tuning Circuits

Element Tungsten speaker cables utilize a special high current parallel geometry alongside its Tungsten Air String to take full advantage of tungsten’s holographic characteristics. With an overall diameter smaller then a US Quarter this cable delivers performance to rival even the world’s thickest (and most expensive) speaker cables in an affordable and easy to manage profile. Aside from our Galileo System and Element Copper Tungsten Silver speaker cables this is the highest performance cable we have ever made and should establish the benchmark for performance and value against which all other speaker cables will be measured.

  • The most holographic of all elements
  • More air with smoother performance then copper
  • Delivers state-of-the-art performance at real world prices
  • Flexible- easy to manage even in tight spaces

UEF Tuning Circuits632UEF Tuning Circuits

As with all Element Series cables start with Grey UEF Tuning Circuit first and allow the cable to settle in for at least 48 hours before experimenting with Silver option. If after 48 hours you wish to open up the sound field and upper registers substitute Silver circuit.

Element Tungsten Speaker Cable Specifications:

  • Tungsten Air String:
  • Tungsten Air Strings: 99.99% pure tungsten conductor with a separate ground conductor from shield
  • 4 separate conductors: 2 signal, 2 DC Shield
  • Dielectric: Air (sealed)
  • Shielding: 30-volt, 250 milliamp Active Shielding
  • Geometry: Four channel
  • Hand Made in our California factory
  • Tricon 3rd Gen High Current:
  • Silver Copper Matrix: Mono crystal conductors with a separate ground conductor from shield
  • Dielectric: Teflon
  • Shielding: 30-volt, 250 milliamp Active Shielding
  • Geometry: 3 channel single ended / 6 channel balanced
  • H.C.S.P Active:
  • Silver Copper Matrix: Mono crystal conductors with a separate ground conductor from shield
  • Dielectric: Modified Polyethylene
  • Shielding: 30-volt, 250 milliamp Active Shielding
  • Geometry: 2 conductor twisted pair + foil shield w DC drain wire
  • Spade or Banana Terminations:
  • Gold plated copper
  • Geometry Count:
  • Each Pair of Element Tungsten Speaker Cables are actually 3 separate pair of cables- 1 pair Tungsten Airstring with separate signal  and ground conductors from shield / DC, 1 pair 3rd Generation Tricon High Current with separate signal, ground and DC shield conductors and 1 pair Element H.C. Active with separate signal and ground conductors from shield / DC
  • Power Supply:
  • 1 Standard 30 volt MPC
  • Build Notes:
  • 68 point-to-point hand soldered connections
  • Hand build time: 8 hours
  • Quantum Tunneling: 2 step process, one for signal / ground, one for Active Shielding conductors and shields
  • Hand Made in our California factory

 


Share This