Atmosphere X Series Phono Cables
Atmosphere X EXCITE is our highest resolution
US $1795/1m - RCA
US $1895/1m - XLR
UEF Matrix Shield with Graphene
Learn more about UEF Matrix Shield
Atmosphere X began when we started exploring ways to improve our UEF Shielding by applying UEF Technology first developed for our BLUE Fuses to Atmosphere Series cables. By placing UEF Tech in a grid pattern on the shields of Atmosphere cables we were able to dramatically lower the noise floor with a surprising increase in musicality or the subjective enjoyment of music. We then began a painstaking double-blind 6-month trial where we would listen to seemingly identical cables marked with random alphanumeric codes to conceal differing patterns of UEF Tech inside each prototype cable and record which options elicited the strongest responses among a control group of listeners. By gauging actual emotional response, we were able to isolate grid patterns that better conveyed the essence of music. We would then build on these patterns to find additional patterns that performed better than the last. In this way, our latest shielding technology is highly evolved from anything we have ever done before with each shield pattern selected for its ability to not only lower a cable’s noise floor but to also convey a greater sense of musical enjoyment. The net result is the most advanced shielding technology we have ever developed with each model in the Atmosphere X Series gaining a special shielding pattern that best compliments the geometries of ALIVE, EXCITE and EUPHORIA.
SRX Long Duration High Voltage Conditioning.
After perfecting the most natural-sounding and holographic cables in our history, we set out to take them further with a new high voltage conditioning process that applies a sweeping frequency plot for an extended duration. We experimented with dozens of frequencies in different combinations over a prolonged time period before landing on just the right mix. We even built a new Tesla Coil to handle the excess heat generated during long conditioning sessions. Once finalized, the SRX conditioning process created holographic realism and timbrel accuracy far beyond our previous Tesla Coil conditioning protocol.
Red Tuning Module
Refine your sound.
Learn more about Red Tuning
RED Tuning Module’s Sonic Characteristics:
Atmosphere X EXCITE Phono cables Specifications:
US $1,795.00/1m Pair - RCA
US $1,895.00/1m Pair - XLR
Additional $100 for DIN connector
2 each (RCA) 4 each (XLR) Tricon 4th Gen cable geometries:
- Silver Matrix: Mono crystal conductors with a separate ground conductor from shield
- Dielectric: Teflon
- Shielding: UEF Ground Plane Technology
- Geometry: 3 channel single ended / 8 channel balanced
- Listening tests performed for signal direction before build
Each Pair of Atmosphere X Excite Phono cables are 2 separate runs of Tricon 4th Gen cables RCA -or- 4 separate runs Tricon 4th Gen cables XLR plus one Level 1 OTSP UEF Field Filter for RCA or XLR interconnects.
RCA and XLR Connectors:
- Silver Teflon SR 20 RCA -or- Neutrik NC3FX-BAG, NC3MX-BAG XLR connectors
2 each Red Tuning Module:
- Optional voicing for incresed warmth, liquidity
- 38 (RCA) 50 (XLR) point-to-point hand soldered connections
- Atmosphere Level 3 UEF Matrix Treatment: 2 different UEF coatings with Graphene are applied to connectors and cabling and ground significantly reducing the noise floor and allowing a purer signal to transfer with less grain providing more warmth and detail. The conductors also benefit from dampening effect that UEF provides.
- 1 Termination for Atmosphere Tuning Module (Red)
- Silver Solder: 4%
- Hand build time: 4 hours
- Quantum Tunneling: Connections and cabling are treated with 1,000,000 volts of electricity at specific frequencies and pulse modulations, creating a canal in the conductor material and contact points at the molecular level that allows electrons to flow more freely
- Secondary UEF Blue Treatment originally developed for SR Blue Fuses
- 5 day Burn In: 2-step process
- Hand crafted in our California factory
How to use tuning modules.
Upgrade your XLR
Connectors are not all created equal. After years of research into connector design we chose high purity, high conductivity, low mass Silver as the base material for SR20 RCA and XLR connectors to deliver more refined detail and accurate information. Teflon is used for it's dielectric properties and the special design gives the greatest area of contact both for wire and plugs insuring that all of your music will get through. These high performance connectors are standard on our Flagship Galileo Interconnects and can be added to Atmosphere as a performance driven upgrade path.
"The Synergistic Research Atmosphere X Euphoria cables are nothing short of compelling. They strike the perfect balance of smooth, full, and resolving. It’s a mesmerizing sound that will keep you in your seat – listening for hours upon hours. It sure did for me."
Siao Jer - Audio Bacon - April 2019
"The Synergistic Research Atmosphere X Euphoria (Level 3) interconnects and speaker cables, along with the Atmosphere UEF (Level 3) power cables, have rekindled my passion for the very best in sound and performance. I had not realized that there was so much more musical information available that could transform my system well beyond flavor or personality."
Robert Youman -Positive Feedback - September 2018
At some point, later in life, we acquire fine components, realizing that they will become our "forever" amp or loudspeaker. The Excite SX cables qualify for that status for me. I wish I had reached this level a decade ago. But in the case of Synergistic Research cables, who can really say "forever"? Ted Denney and Synergistic Research are showing no signs of slowing down their creativity or technological innovation.
Rick Becker - Enjoy the Music - April 2022
"Finally, moving on to the Euphoria Level 3, and once again I heard more of the same. I made out a firmer bass line and more articulate piano playing. The decay of the notes seemed more evident, and overall the sound had noticeably greater subtlety, finesse, and delicacy. There was something more, as I felt more drawn into the music."
Jimmy Hughes -Stereonet - March 2021
“First, compared to the Elements, the Atmospheres had a naturally warmer, more organic, and harmonically fuller sound that lacked the older cables’ relatively sharp edges.”
"Synergistic Research cables and devices, was absolutely thrilling, with tremendous dynamic impact, presence, and detail"
"The Synergistic Research set of cables are expansive in all three dimensions, revealing with resolution and raw details, incredibly quiet in its noise floor with a lot of bass extension in treble energy."
Siao Jer - Audio Bacon - August 2018
“I just couldn’t find a flaw in the SR Atmosphere speaker cables”
"Once you have heard the difference these speaker cables can make to your system, you cannot un-hear it"
“Better sound for less money from the same manufacturer? My goodness, how often does this happen?”
"I wouldn't have believed they could have made such a difference. Combining the two, there is not much sonic distance between my system now, and those costing hundreds of thousands of dollars"
2017 Product of the Year
Atmosphere Level 4 Cables and PowerCell 12 UEF
Atmosphere acoustic field generator
Supercharge your cables.
Imagine listening to Charlie Parker at Birdland, then walk into Carnegie Hall to be seated at the best place in the house. This is can all be possible in your listening room by adding Atmosphere. No other product allows you to tailor the size and depth of your soundstage with stunning realism to accurately match the type of music you are listening to. Atmosphere is a multi-wave RF generator that has the ability to change your listening environment. Simply place it your room, turn it on, and let yourself be amazed.
Carbon Performance Elevators
Elevate your system.
UEF Carbon Elevators lift your cables from the floor as they uplift fundamental aspects of system performance, including low-frequency weight and control, mid-range clarity, and high-frequency extension. Perhaps most dramatic is the effect on your system’s ability to portray soundstage scale with improvements in front to back, side to side, and verticle image placement, all with a greater sense of the sound field wrapping around your listening position. Our first cable elevators were made from aluminum after extensive double-blind listening tests, where aluminum exhibited superior sound quality compared to materials like plexiglass, wood, and ceramic. The one material we did not test was Carbon Fiber due to its difficulty to cut and fabricate. Fast forward two years, and we have perfected the use of carbon fiber in SR products, including our state-of-the-art SRX cable loom, Galileo Active Ground Block, Active Ethernet Switch, and MiG SX footers. So we built a set of carbon fiber elevators and compared them to our Aluminum cable risers. We found the same improvements as all SR products using carbon fiber, namely, increased resolution, inner detail, and clarity. The included HFT’s (Red Dot visible in photographs) use a new UEF compound first developed for SRX speaker cables and Purple fuses enteract with your cables EM fields for life like soundstage scale with enhanced dynamics and high-frequency extension. Of course, cable elevators are a controversial upgrade for many, so we make it easy to try a set in your system risk-free. Audition in your system, and if you disagree, return them to your dealer for a full refund.