Select Page

MiG and MiG 3.0

Isolation Footers

Voice your system.


Standard MiG footers offer all the hallmarks of our highest performance MiG SX, including an increased sense of space in the sound field plus improvements in low-frequency control and extension with high-frequency air and detail. While the new MiG 3.0 delivers all this with greatly enhanced resolution that is never fatiguing, plus a wall-to-wall holographic soundstage, including a sense of the performance enveloping your listening position. Listening notes: comparing MiG’s to isolation footers based on dampening principles, you hear more extended dynamic range and spatial cues where dampened footers tend to have a flatter sound and lack dynamic extension. Isolation footers based primarily on draining mechanical vibration away from the component tend to sound bright with less sound stage layering and mid-range warmth when compared to MiG’s. Lastly, if you have a full suite of SR Tech, your best possible footers will likely be MiG’s, as they work on similar principles and have a similar house sound to SR cables, power products, and acoustic treatments.


$150 / set of 3

The original MiG or Mechanical Interface Ground is a superb footer that excels with a warm natural balance that can be tuned through two placement options to best match your system. Placing just one or two sets of MiG’s under your components can deliver a significant increase in sound staging with a balanced to slightly warm tonal balance.

MiG 3.0

$295 / set of 3

MiG 3.0 came about when our lead designer sought to incorporate new UEF technologies first developed during our SRX reference cable loom and Purple fuse design programs. He intended to bring MiG 3.0 closer to MiG SX’s increased resolution but with a richer and more dynamic harmonic structure with enhanced sound staging capabilities over MiG 2.0. To make this happen, we retuned the resonance characteristics of the MiG itself while incorporating the same UEF element found in SRX cables and Purple Fuses. The result is a MiG footer with a lower noise floor from which springs enhanced resolution with smoother highs and a larger sound field over the standard MiG and outgoing MiG 2.0.

MiG 3.0 with Tranquility Carbon

MiG and MiG 3.0

Placement Instructions




I’ve had my share of footers over the years but in comparison, the Synergistic Research MiG 2.0s are a must have component and well worth the price of admission.

“clarifying, and introducing greater coherence into an audio presentation…is therefore yoked to the sonic benefits of the feet themselves.”

“Not only did I hear greater clarity and control with the new models, but I found that their use extends beyond the Tranquility Base UEF.”


Synergistic Research MiG 2.0 Footer Review & Listening Test - By Novice Review

Share This